manualshive.com logo in svg

Trilithic 180 DSP, Operation Manual

Share
Download
Trilithic 180 DSP Operation Manual Download Page 227

www.trilithic.com

Page IV-31

180 DSP Operation Manual

Signal Level Meter

Go to QAM EVS (OPTIONAL)

When the QAM Error Vector Spectrum Analysis option is activated in a 180 DSP, the 

Go 

to QAM EVS 

feature provides the ability to go to the QAM EVS display directly from the 

Level

 measurement screen.

Select the 

Goto QAM EVS

 button 

from the 

Display

 pop-up menu to 

display the 

QAM EVS

 screen.

The 

QAM EVS

 screen 

provides users 

with the ability to tune the meter to a 

downstream QAM channel and display 

its error vector spectrum to reveal 

noise and ingress that may be present 

under the QAM channel.

For more information on QAM EVS, see Chapter 7: QAM Error 

Vector Spectrum Analysis, later in this section.

Summary of Contents for 180 DSP



































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands