Trilithic 180 DSP, Operation Manual

Page: 53 / 386

www.trilithic.com
Page I-34
180 DSP Operation Manual
Signal Level Meter
Toggle Flashlight
This function is used to toggle the flashlight
on and off. To turn the LED flashlight on,
select the Toggle Flashlight button from the
Function menu as shown in the image to the
right.
The LED flash light will illuminate until the
flashlight delay has expired (between 30 and
180 seconds, user adjustable) or it has been
manually toggled off.
To manually toggle the LED flash light off,
press the
Function
button and then select the
Toggle Flashlight
function again.
To adjust the Flashlight Delay, see Section II: Setup, Chapter 3:
Meter Configuration, Interface Settings.