Control panel SP231
Configuration of control panel operation
©1997-2015 Trikdis
49
www.trikdis.com
Control Areas with Wireless Icon Keypad:
To control Areas with keypad enter User codes to the keypad:
The User Code 1 default is 1234. The next 7 User codes are blank.
Example of adding user code # 2
1)
Enter into programming mode
2)
Press key "2" + new 4 digits user code
3)
The 1 second duration tone is played on code add/change.
4)
Exit from programming mode
Register RFID tags:
The RFID Tag may be changed or added only while keypad is in programming mode. Up to 8 RFID Tags may be
set for keypad. The RFID Tag IDs are saved and ready after every keypad power up.
How to modify RFID Tag #1 (user 1):
1)
Press key “1”and approach tag to
2)
The 1 second duration tone is played on code add/change.
6.18
Setting of temperature metering report characteristics
Parameters required for transmission of temperature variation reports are indicated in the program menu
Temperature Sensors.
When temperature sensors are physically connected and power supply is on, the control panel SP231 will
automatically register sensor modules.
Temperature sensor parameters
Name
Description
ID
Sensor sequence number
Sensor name
Sensor name.
Serial
Sensor registration number Numbers can be cleared (by entering zeros) ore copied (by
changing their order). To remove a sensor, enter 16 zeros in this field.
RT
The existing temperature value measured by sensor, °C.
Max °C
Maximum allowable temperature value, the excess of which will be reported. For such
purpose High must be checked.
Min °C
Minimum allowable temperature value, below which the situation will be reported. For
such purpose Low must be checked.
Hyst
Temperature hysteresis value is indicated.
High temp. SMS Text, which will be visible in SMS message in case of set temperature excess, is entered.
Low temp. SMS Text, which will be visible in SMS message in case of temp. below the set one, is entered.
Temperature sensor parameters
