Tridonic DALI MSensor 02, Product Manual

Page: 6 / 38

&nbsp New features
Documentation DALI MSensor 02 | 02-2012 | en - 6 / 38 -
New features
New grouping concept
The DALI MSensor 02 only assigns one DALI group, the luminaire group. The notion of a sensor group has been omitted
from the new group concept. This has resulted in changed behaviour in response to some DALI commands ( see chapter
"Special DALI settings", page 25).
Reaction of DALI MSensor 02 to scene recalls
The way that the DALI MSensor 02 responds to scene recalls can be set. For example, it is possible to activate light control
by the DALI MSensor 02 by calling up a scene ( ). see chapter "Special DALI settings", page 25
Presence synchronisation with other DALI MSensor 02 groups
The DALI MSensor 02 makes it possible to set up presence synchronsiation between several DALI MSensor 02 groups. In
doing so, it is possible to specify how the DALI MSensor 02 should respond to any presence in other groups ( see chapter
"Presence control", page 17
Extended operating modes for integration in other control
systems
Two new operating modes which are specially optimised to support integration into non-Tridonic control systems have been
built into the DALI MSensor 02 ( ). see chapter "Enhanced functionality", page 29
...