  Constant light control
Documentation DALI MSensor 02 | 02-2012 | en
- 15 / 38 -
Procedure with masterCONFIGURATOR
Directly enter the brightness setpoint
Setting the ambient light-based bright-out and bright-in
This function can be activated or deactivated. The individual parameters can be adjusted. All settings can be made by using
the masterCONFIGURATOR software (V2.02 or later) (
).
see chapter "Source directory", page 35
Tricks and hints
Position the ambient light sensor correctly
Ambient light control is based on measuring reflected artificial light and daylight. This light must be detected correctly and
completely. Prevent measurements being falsified by other light sources. Positioning the ambient light sensor correctly is
crucial:
1. In order to be able to control ambient lighting properly, the sensor must be able to detect the light from the controlled
luminaires completely.
Position the sensor so that the sensor's detection area lies within the area that is lit by the controlled luminaires.
2. If the sensor is directly exposed to other light sources, this falsifies the results obtained and the reflected artificial light and
daylight can no longer be detected correctly.
Position the sensor so that it is not directly exposed to other artificial light sources (e.g. free-standing luminaires in the
room).
Summary of Contents for DALI MSensor 02
Page 1: ...luxCONTROL Product manual DALI MSensor 02 ...
Page 2: ......
