  Special DALI settings
Documentation DALI MSensor 02 | 02-2012 | en
- 26 / 38 -
Presence control:
In switched-off state: presence detector is activated and changes to "Presence" state.
In switched-on state: presence detector changes to "Presence" state, delay time is restarted.
Switch off (DALI "OFF" command or "Direct Arc Power 0")
In the case of direct setpoint invocation, a distinction must be made between setpoint commands greater than 0% and
setpoint commands equal to 0%. Setpoint commands equal to 0% act as a switch-off command. The specific DALI "OFF"
command also acts as a switch-off command. The following behaviour applies for both variants:
Constant light control:
Luminaire group is switched off.
Presence control:
Presence detector changes to "Time lag (manual OFF)" state.
Switch on at maximum value (DALI "Recall Max" command)
Constant light control:
This behaviour can be adjusted in the masterCONFIGURATOR configuration software:
The maximum value of the control gear is invoked, light control is temporarily disabled or
The maximum value of the control gear is invoked, light control is activated.
Presence control:
In switched-off state: presence detector is activated and changes to "Presence" state.
In switched-on state: presence detector changes to "Presence" state, delay time is restarted.
Recall scene (DALI "Recall Scene x" command)
This behaviour can be adjusted in the masterCONFIGURATOR configuration software:
automatic
Constant light control:
Light control is activated
Presence-based control:
In switched-off state: presence detector is activated and changes to "Presence" state.
In switched-on state: presence detector changes to "Presence" state, delay time is restarted.
static
Constant light control:
Light control is temporarily deactivated
Summary of Contents for DALI MSensor 02
Page 1: ...luxCONTROL Product manual DALI MSensor 02 ...
Page 2: ......
