TRENDnet TI-G160WS, User Manual, Page: 81 / 148

© Copyright 2019 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide
Industrial Managed Switch Series
78
Power Off Time
When PD has been rebooted, the PoE port restored power after
the Power Off Time time.
Start Up Time
The Switch waits the Start Up Time to do PoE Auto Checking
when the PD is rebooting.
Apply Click Apply to take effect the settings.
Refresh Click Refresh to begin configuring this screen afresh.
PoE Schedule
The function has a global state configuration. If the global state configuration is
disabled. The Switch will not perform the schedule function. If the global state is
enabled, the Switch will check every port’s configurations.
If the port’s check configuration is NO for a specific day, the Switch will not perform
action for the specific port. If the port’s check configuration is YES for a specific day, the
Switch will check the Start time and End Time. If the current time is in the interval
between Start time and End Time, the Switch will perform the action configuration. If
the action is ENABLE, the Switch will send power to the port. If the current time is not in
the interval between Start time and End Time, the Switch will not send power to the
port.
CLI Configuration
Node Command Description
enable show poe schedule port PORT_ID This command displays the PoE
port schedule configurations.
interface poe schedule (disable|enable) This command disables or enables
the PoE schedule on the specific
port.
interface poe schedule week
(Sun|Mon|Tue|Wed|Thu|Fri|Sat)
check (yes|no) This command enables or disables
the PoE schedule on the specific
day.
interface poe schedule week
(Sun|Mon|Tue|Wed|Thu|Fri|Sat)
start-time VALUE end-time VALUE
action (enable|disable) This command configures the PoE
schedule start-time and end-time
on a specific day on the specific
port. Users can enable or disable
the PoE on the time period.
Web Configuration
Advanced Settings > PoE > Schedule
Parameter Description
Port
Selects a port that you want to configure the PoE schedule
function.
Week
Select a week day that you want to configure the schedule.
Check
Enables or Disables the PoE schedule on the specific port for a
defined time period.
Time (Hour) Select the time (in hours) to start and stop the schedule.