TRENDnet TI-G160WS, User Manual, Page: 30 / 148

© Copyright 2019 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide
Industrial Managed Switch Series
27
static MACADDR vlan
VLANID from the address table.
configure clear mac address-
table dynamic This command clears the dynamic address
entries.
Example:
[DEVICE_NAME](config)#mac-address-table static 00:11:22:33:44:55 vlan 1 port 1
Web Configuration
Basic Settings > MAC Management > Static MAC Settings
Static MAC
A static Media Access Control (MAC) address is an address that has been manually
entered in the MAC address table, and do not age out. When you set up static MAC
address rules, you are setting static MAC addresses for a port, so this may reduce the
need for broadcasting.
Parameter Description
Static MAC Settings
MAC Address
Enter the MAC address of a computer or device that you want to
add to the MAC address table.
Valid format is hh:hh:hh:hh:hh:hh.
VLAN ID Enter the VLAN ID to apply to the computer or device.
Port
Enter the port number to which the computer or device is
connected.
Apply Click Apply to take effect the settings.
Refresh Click Refresh to begin configuring this screen afresh.
Static MAC Table
MAC Address
This field displays the MAC address of a manually entered MAC
address entry.
VLAN ID
This field displays the VID of a manually entered MAC address
entry.
Port
This field displays the port number of a manually entered MAC
address entry. The MAC address with port CPU means the
Switch’s MAC addresses itself.
Action
Click Delete to remove this manually entered MAC address entry
from the MAC address table. You cannot delete the Switch’s MAC
address from the static MAC address table.