TRENDnet TI-G160WS, User Manual, Page: 42 / 148

© Copyright 2019 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide
Industrial Managed Switch Series
39
its packets.
configure qos mode wfq-queue This command configures the QoS scheduling
mode to Weighted Fair Queuing.
configure qos mode wrr-queue
weights VALUE VALUE
VALUE VALUE VALUE
VALUE VALUE VALUE This command configures the QoS scheduling
mode to Weighted Round Robin.
interface default-priority This command allows the user to specify a
default priority handling of untagged packets
received by the Switch. The priority value
entered with this command will be used to
determine which of the hardware priority
queues the packet is forwarded to. Default: 0.
interface no default-priority This command configures the default priority
for the specific port to default (0).
enable show diffserv This command displays DiffServ
configurations.
configure diffserv
(disable|enable) This command disables / enables the DiffServ
function.
configure diffserv dscp VALUE
priority VALUE This command sets the DSCP-to-IEEE 802.1q
mappings.
Web Configuration
Port Priority
Advanced Settings > Bandwidth Control > QoS
Parameter Description
All Ports 802.1p
priority
Use this field to set a priority for all ports.
The value indicates packet priority and is added to the priority tag
field of incoming packets. The values range from 0 (lowest
priority) to 7 (highest priority).
Port This field displays the number of a port.
802.1p Priority
Select a priority for packets received by the port. Only packets
without 802.1p priority tagged will be applied the priority you set
here.