TRENDnet TI-G160WS, User Manual, Page: 65 / 148

© Copyright 2019 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide
Industrial Managed Switch Series
62
EEE (Energy Efficient Ethernet)
The Energy Efficient Ethernet (EEE) is an IEEE 802.3az standard that is designed to reduce
power consumption in Ethernet networks during idle periods.
EEE can be enabled on devices that support low power idle (LPI) mode. Such devices can
save power by entering LPI mode during periods of low utilization. In LPI mode, systems
on both ends of the link can save power by shutting down certain services. EEE provides
the protocol needed to transition into and out of LPI mode in a way that is transparent to
upper layer protocols and applications.
Default Settings
All ports’ EEE states are disabled.
CLI Configuration
Node Command Description
enable show interface
[IFNAME] This command displays the current port
configurations.
interface
power efficient-
ethernet auto The command enables EEE on the specified
interface. When EEE is enabled, the device
advertises and auto negotiates EEE to its link
partner.
interface
no power efficient-
ethernet auto
The command disables EEE on the specified
interface.
Example:
[DEVICE_NAME]#configure terminal
[DEVICE_NAME](config-if)#interface gigabitethernet1/0/1
[DEVICE_NAME](config-if)#power efficient-ethernet auto
[DEVICE_NAME](config-if)#no power efficient-ethernet auto
Web Configuration
Advanced Settings > EEE
Parameter Description
EEE Port State
Click a port to enable IEEE 802.3az Energy Efficient Ethernet on
that port.
Select All
Click this to enable IEEE 802.3az Energy Efficient Ethernet across
all ports.
Deselect All
Click this to disable IEEE 802.3az Energy Efficient Ethernet across
all ports.
Apply Click Apply to configure the settings.
Refresh Click this to reset the fields to the last setting.