TRENDnet TI-G160WS, User Manual, Page: 78 / 148

© Copyright 2019 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide
Industrial Managed Switch Series
75
CLI Configuration
Node Command Description
enable show poe This command displays the PoE
configurations and status.
enable show poe schedule port PORT_ID This command displays the PoE
port schedule configurations.
configure poe (disable | enable) This command disables or enables
the global PoE for the Switch.
configure poe total-power This command configures the total
power which the Switch can
support.
interface poe (disable|enable) This command enables or disables
the PoE function on the specific
port.
interface poe priority (critical|high|low) This command configures the
priority of the PoE function for the
specific port.

critical: The highest priority.

high: The middle priority.

low: The lowest priority.
Web Configuration
Advanced Settings > PoE > Configuration
Parameter Description
PoE Mode
Selects the PoE mode, classification or consumption.
Classification - Allocated power according to class (0 to 4).
Consumption - Allocated power according to the actual need of
each PD.
Port
Selects a port or a range of ports that you want to configure
the PoE function.
State
Selects Enable to enable the PoE function on the specific port.
Selects Disable to disable the PoE function on the specific port.
Priority Selects Critical / High / Low priority for the specific port.