TRENDnet TI-G160WS, User Manual, Page: 72 / 148

© Copyright 2019 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide
Industrial Managed Switch Series
69
Web Configuration
Advanced Settings > Loop Detection
Parameter Description
State Select this option to enable loop guard on the Switch.
MAC Address
Enter the destination MAC address the probe packets will be
sent to. If the port receives these same packets the port will be
shut down.
Port Select a port on which to configure loop guard protection.
State Select Enable to use the loop guard feature on the Switch.
Loop Recovery
Select Enable to reactivate the port automatically after the
designated recovery time has passed.
Recovery Time
Specify the recovery time in minutes that the Switch will wait
before reactivating the port. This can be between 1 to 60
minutes.
Apply Click Apply to save your changes to the Switch.
Refresh Click Refresh to begin configuring this screen afresh.
Loop Guard Status
Port This field displays a port number.
State This field displays if the loop guard feature is enabled.
Status This field displays if the port is blocked.
Loop Recovery This field displays if the loop recovery feature is enabled.
Recovery
Time (min)
This field displays the recovery time for the loop recovery
feature.