TRENDnet TI-G160WS, User Manual, Page: 110 / 148

© Copyright 2019 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide
Industrial Managed Switch Series
107
Default Settings
The port security on the Switch is disabled.
The Maximum MAC per port is 5.
The port state of the port security is disabled.
CLI Configuration
Node Command Description
enable show port-security This command displays the current
port security configurations.
configure
port-security (disable|enable) This command enables / disables
the global port security function.
interface port-security (disable|enable) This command enables / disables
the port security function on the
specific port.
interface port-security limit VALUE This command configures the
maximum MAC entries on the
specific port.
configure interface range
gigabitethernet1/0/ PORTLISTS This command enters the interface
configure node.
if-range port-security (disable|enable) This command enables / disables
the port security function for the
specified ports
if-range port-security limit VALUE This command configures the
maximum MAC entries for the
specified ports.
Web Configuration
Security > Port Security
Parameter Description
Port Security Settings
Port Security Select Enable/Disable to permit Port Security on the Switch.
Port Select a port number to configure.
State Select Enable/Disable to permit Port Security on the port.
Maximum MAC
The maximum number of MAC addresses allowed per interface.
The acceptable range is 1 to 30.
Port Security Status
Port This field displays a port number.
State This field displays if Port Security is Enabled or Disabled
Maximum MAC This field displays the maximum number of MAC addresses