© Copyright 2012TRENDnet. All Rights Reserved.
TRENDnet User’s Guide
TEW-676APBO
93
Wireless MAC Filter Setup
Continue
7.3.1 Repeater AP
Setup
section, the administrator can allow or reject clients
to access Repeater AP.
MAC Filter Setup :
By default, it’s “
Disable
”. Options
are
Disable, Only Deny List
MAC or Only Allow List MAC
.
Two ways to set MAC filter rules :
Only
Allow List MAC
.
The wireless clients in the “
Enable
” list will be
allowed
to access the Access Point;
All others or clients in the “
Disable
” list will be
denied
.
Only
Deny List MAC
.
The wireless clients in the “
Enable
” list will be
denied
to access the Access Point; All
others or clients in the “
Disable
” list will be
allowed
.
Add a station MAC :
Enter MAC address (e.g. aa:bb:cc:00:00:0a) and click “
Add
”
button, then the MAC address should display in the “
Enable
” List.
There are a maximum of
20
clients allowed in this “Enable” List. The MAC addresses of
the wireless clients can be added and removed to the list using the
Add
and
Remove
buttons
.
Click
Reboot
button to activate your changes
System Status
This section breaks down into subsections of
System Overview
,
Associated Clients
Status
,
Remote AP
,
Extra Information
and
Event Log
.
System Overview
Display detailed information of
System, Network, LAN and Wireless
in the System
Overview page.
System :
Display the information of the system.
System Name :
The name of the system.
Operating Mode :
The mode currently in service.
Location :
The reminding note on the geographical location of the system.
Description :
The reminding note of the system.
Firmware Version :
The current firmware version installed.
Firmware Date :
The build time of the firmware installed.
Device Time :
The current time of the system.
System Up Time :
The time period that system has been in service since last
reboot.
