TRENDnet 12dBi User Manual Download Page 119

Page: 119 / 147

TRENDnet User’s Guide

TEW-676APBO

119



WAN Information :

Display the information of the WAN interface.

The WAN port specified

Dynamic

, the Release and Renew button will be show-

up, click

Release

button to release IP address of WAN port,

Renew

button to renew

IP address through DHCP server.

The WAN port specified

PPPoE

PPTP

, and the

Connect

and

DisConnect

button

will be show up. Click “

Connect

” button to assigned IP address from PPPoE or PPTP

server, “

DisConnect

” button to release IP address of WAN port.



Mode :

Supports Static, Dynamic, PPPoE and PPTP modes.



Reconnect Mode :

The current reconnect mode of the PPPoE or PPTP.



MAC Address :

The MAC address of the WAN port.



IP Address :

The IP address of the WAN port.



IP Netmask :

The IP netmask of the WAN port.



IP Gateway :

The gateway IP address of the WAN port.



Primary DNS :

The primary DNS server in service.



Secondary DNS :

The secondary DNS server in service.



Receive bytes :

The total received packets in bytes on the WAN port.



Receive packets :

The total received packets of the WAN port.



Transmit bytes :

The total transmitted packets in bytes of the WAN port.



Transmit packets :

The total transmitted packets of the WAN port.



LAN Information :

Display total received and transmitted statistics on the LAN

interface.



MAC Address :

The MAC address of the LAN port.



IP Address :

The IP address of the LAN port.



IP Netmask :

The IP netmask of the LAN port.



Receive bytes :

The total received packets in bytes on the LAN port.



Receive packets :

The total received packets of the LAN port.



Transmit bytes :

The total transmitted packets in bytes of the LAN port.



Transmit packets :

The total transmitted packets of the LAN port.



Wireless Information :

Display the detailed receive and transmit statistics of

Wireless interface.

Summary of Contents for 12dBi



















































































































































Search results

Summary of Contents for 12dBi

Reviews:

Related manuals for 12dBi

Brands by name

Popular brands

TRENDnet 12dBi, User Manual

Search results

Summary of Contents for 12dBi

Reviews:

Related manuals for 12dBi

Brands by name

Popular brands