© Copyright 2012TRENDnet. All Rights Reserved.
TRENDnet User’s Guide
TEW-676APBO
127
SNMP ro user :
Set a community string to authorize read-only access.
SNMP ro password :
Set a password to authorize read-only access.
SNMP rw user :
Set a community string to authorize read/write access.
SNMP rw password :
Set a password to authorize read/write access.
SNMP Trap :
Events such as cold start, interface up & down, and association &
disassociation will report to an assigned server.
Community :
Set a community string required by the remote host computer
that will receive trap messages or notices send by the system.
IP :
Enter the IP addresses of the remote hosts to receive trap messages.
Click
Save
button to save changes and click
Reboot
button to activate.
Backup / Restore and Reset to Factory
Backup current configuration, restore prior configuration or reset back to factory default
configuration can be executed via this page.
Please click on
Utilities -> Profile Setting
and follow the below setting.
Save Settings to PC :
Click
Save
button to save the current configuration to a local
disk.
Load Settings from PC :
Click
Browse
button to locate a configuration file to restore,
and then click
Upload
button to upload.
Reset To Factory Default :
Click
Default
button to reset back to the factory default
settings and expect
Successful
loading message
.
Then, click
Reboot
button to
activate.
