TRENDnet 12dBi, User Manual

Page: 55 / 147

© Copyright 2012TRENDnet. All Rights Reserved.
TRENDnet User’s Guide
TEW-676APBO
55

Link Status :

Status : Shows the current link status. It should be “ Connected ” or
“ Disconnected ”.

ESSID : Shows the current SSID, which must be the same on the wireless client
and AP in order for communication to be established.

BSSID : Shows the associated BSSID, which can be used to identify the wireless
access point.

Extra Info : Shows the current link status of extra information. It should be
“ Link is Up ” or “ Link is Down ”,

Channel : Shows current channel and central channel, its corresponding
frequency.

Link Speed(Mbps) : The data transfer speed adopted by this network.
(measured in Mbits per second)

Link Quality : Shows the link quality of the system with an access point.

Signal Strength ANT0/ANT1 : Shows the wireless signal strength of the
connection between system and an access point.

HT Status :

Channel BandWidth : Shows the current channel bandwidth used for
communication. It should be “ 20 ” or “ 40 ”

Guard Interval : Shows the current GI used for communication. It should be
“ short ” or “ long ”.

MCS :
Shows the current GI used for communication. It should be between
0
to 15 or 32 .

Transmit Statistics

Frames Transmitted Successfully: The number of successfully transmitted
frames.

Frames Transmitted Successfully Without Retry: The number of successfully
transmitted frames without any retry.

Frames Transmitted Successfully After Retry(s): The number of successfully
transmitted frames with one or more retries.

Frames Fail To Receive ACK After All Retries: The number of unsuccessfully
transmitted frame with many retries.

RTS Frames Successfully Receive CTS: The number of successful received CTS
(Clear To Send) response after this TEW-676APBO sends out the RTS (Request
To Send) message.

RTS Frames Fail To Receive CTS: The number of unsuccessful received CTS
response after this TEW-676APBO sends out the RTS message.

Receive Statistics

Frames Received Successfully: The number of successful received frames.

Frames Received With CRC Error:
The number of received frames with CRC
(Cyclical Redundancy Checking) error.

Frames Dropped Due To Out-of-Resource: The number of dropped frames.

Duplicate Frames Received: The number of duplicate frames.
Extra Info
Users could pull out information such as Route table, ARP table, MAC table, Bridge table
or STP available in the drop-down list from system. The “Refresh” button is used to
retrieve latest table information.