TRENDnet 12dBi, User Manual, Page: 75 / 147

© Copyright 2012TRENDnet. All Rights Reserved.
TRENDnet User’s Guide
TEW-676APBO
75

Protocol : Select Any or specify protocol from drop-down list. When you select
ICMP or Layer 7 Application , the Source/ Destination Port cannot be used.

Local Port : Specify local port(LAN port) range required for this rule

Destination Port : Specify destination port range required for this rule

Action : After configuring rule, a policy rule ensures that a traffic flow gets the
requested treatment in the network.

Remark DSCP : Specify a new DSCP class, if you want to replace or remark the
DSCP

Bandwidth : Click “ Enable ” to activate function, and click “ Disable ” to
deactivate function

Upload / Download : Specify the bandwidth in kilobit per second (Kbps). Enter
a number between 8 to 8192 , default upload is 128 Kbps, download is 1024
Kbps.
Click “
Add
” button to add QoS rule to List. There are
10
rules maximum allowed in this
QoS List. All rules can be removed or edited on the List. Click Reboot button to activate
your changes.
When you create rules on the QoS List, the previous rules have higher priority. . Below
depict the examples for explaining priority of QoS setup.

Example 1 : On this setting, the FTP has 1024 Kbps upload and 8196 Kbps
download on 192.168.2.10 . The remaining IP address and other remaining
protocol of IP address 192.168.2.10 only can use total bandwidth 512 Kbps
bandwidth. Because rule 1's priority is higher than rule 2

Example 2 : On this setting, the FTP has 512 Kbps upload and 512 Kbps
download on 192.168.2.10 Because rule 1's priority is higher than rule 2
Resource Sharing
DMZ
DMZ is commonly work with the NAT functionality as an alternative of Virtual
Server(Port Forwarding
)
while wanting all ports of DMZ host visible to Internet users.
Virtual Server rules have precedence over the DMZ rule. In order to use a range of ports
available to access to different internal hosts Virtual Server rules are needed.
Please click on Advance -> DMZ and follow the below setting.
Rule Source IP
Destination
IP
DSCP Protocol Remark
DSCP
Bandwidth
(Up/Down)
1 192.168.2.10 ANY FTP NO 1024/8196
2 ANY ANY NO 512/512
Rule Source IP
Destination
IP
DSCP Protocol Remark
DSCP
Bandwidth
(Up/Down)
1 ANY ANY NO 512/512
2 192.168.2.10 ANY FTP NO 1024/8196
WIFI WAN
Main
LAN
N
SSID: Repeater