© Copyright 2012TRENDnet. All Rights Reserved.
TRENDnet User’s Guide
TEW-676APBO
46
the system via telnet from your subnet, not others, the Example 1 demonstrates it, not
rules in the Example 2.
Example 1
:
Create a higher priority rule to allow IP address 192.168.2.2 Telnet
access from LAN port first, and deny Telnet access from remaining IP addresses
in the same subnet.
Rule
Source
Destination
I/O
Protocol
L
Act
Side
IP/Mask
Port
IP/Mask
Port
1
192.168.2.2/
32
192.168.2.254/
32
22
In
TCP
n Pass
LAN
2
192.168.2.0/
24
192.168.2.254/
32
22
In
TCP
n Deny LAN
Example 2 :
All Telnet access to the system from the IP addresses of subnet
192.168.2.x works with the rule 1 of Example 2. The rule 2 won’t make any
difference.
Rule
Source
Destination
I/O
Protocol
L
Action
Side
IP/Mask
Port
IP/Mask
Port
1 192.168.2.0/2
4
192.168.2.254
/32
22
In
TCP
n Deny LAN
2 192.168.2.2/3
2
192.168.2.254
/32
22
In
TCP
n
pass LAN
MAC Filter Setup
Allows to create MAC filter rules to allow or deny unicast or multicast packets from
limited number of MAC addresses. Important to note that MAC filter rules have
precedence over IP Filter rules.
Please click on
Advance -> MAC Filter Setup
and follow the below setting.
MAC Filter Rule :
By default, it’s “
Disable
”. Options are
Disabled
,
Only
Deny List
MAC
or
Only Allow List MAC
. Click
Save
button to save your change.
Two ways to set the MAC Filter List:
Only Allow List MAC
.
The wireless clients in the MAC Filter List will be
allowed
to access to Access Point;
All others will be denied.
Only Deny List MAC
.
The wireless clients in the MAC Filter List will be
denied
to access to Access Point;
All others will be allowed.
MAC Address :
Enter MAC address (e.g. aa:bb:cc:00:00:0a) and click “
Add
” button,
then the MAC address should display in the MAC Filter List.
There are a maximum of
20
clients allowed in this MAC Filter List. The MAC addresses of
the wireless clients can be added and removed to the list using the
Add
and
Delete
buttons
.
Click
Reboot
button to activate your changes
