© Copyright 2012TRENDnet. All Rights Reserved.
TRENDnet User’s Guide
TEW-676APBO
113
MAC Filter Setup
Allows to create MAC filter rules to allow or deny unicast or multicast packets from
limited number of MAC addresses. Note, the MAC filter rules have precedence over IP
Filter rules.
Please click on
Advance -> MAC Filter Setup
and follow the below setting.
MAC Filter Rule :
By default, it’s “
Disable
”. Options are
Disabled
,
Only
Deny List
MAC
or
Only Allow List MAC
. Click
Save
button to save your change.
Two ways to set the MAC Filter List:
Only Allow List MAC
.
The wireless clients in the MAC Filter List will be
allowed
to access to Access Point;
All others will be denied.
Only Deny List MAC
.
The wireless clients in the MAC Filter List will be
denied
to access to Access Point;
All others will be allowed.
MAC Address :
Enter MAC address (e.g. aa:bb:cc:00:00:0a) and click “
Add
” button,
then the MAC address should display in the MAC Filter List.
There are a maximum of
20
clients allowed in this MAC Filter List. The MAC addresses of
the wireless clients can be added and removed to the list using the
Add
and
Delete
buttons
.
Click
Reboot
button to activate your changes
Parental Control Setup
Parental Control allows you to block or allow specific kinds of Internet usage and traffic,
such as Internet access, designated services, and websites.
Please click on
Advance -> Parental Control
and follow the below setting.
WAN
WLAN
WDS
SSID:
Station
MSN
NAT
