© Copyright 2012TRENDnet. All Rights Reserved.
TRENDnet User’s Guide
TEW-676APBO
107
Click
Save
button to save your changes. Click
Reboot
button to activate your changes.
The items in this page are for AP's RF advanced settings and will be applied to
all VAPs
and
WDS Links
.
Create Virtual AP (VAP)
The TEW-676APBO support broadcasting multiple SSIDs, allowing the creation of Virtual
Access Points, partitioning a single physical access point into
7
logical access points, each
of which can have a different set of security and network settings.
Figure 8-2
shows
multiple SSIDs with security type settings.
Multiple SSIDs with different Security Type
Virtual AP Overview
The administrator can view all of the Virtual AP's settings via this page.
Please click on
Wireless -> Virtual AP Setup
and the Virtual AP Overview Page appears.
VAP :
Indicate the system's Virtual AP.
ESSID :
Indicate the ESSID of the respective Virtual AP
MAC Address :
The MAC address of the VAP Interface is displayed here. When you
enable AP and reboot system, the MAC address will display here.
Status :
Indicate the Status of the respective Virtual AP. The
Primary AP
always on.
Security Type :
Indicate an used security type of the respective Virtual AP.
MAC Filter :
Indicate an used MAC filter of the respective Virtual AP.
Edit :
Click
Edit
button to configure Virtual AP's settings, including security type and
MAC Filter.
WEP
WPA-PSK/TKIP
WPA2-PSK/AES
WPA-Enterprise/TKIP
NAT
WAN
WAN
