Traub TNL20, Operating Instructions Manual

Page: 37 / 74

37
Transport and installation
TNL20
DTE022DE - 24.06.2021
Transporting the machine
Openings for inserting the fork arms of the fork lift truck
The machine must be lifted from the control cabinet side when
transported by a fork lift truck.
Non-slip rubber mats should be placed over the fork arms of the fork lift truck
when transporting the machine.
The fork arms must be inserted in the openings on the control cabinet side to
lift the machine.
When setting the machine down, ensure that the fork arms are not tilted, other-
wise the planks will break.
Forklift requirement
Lifting force min.
(depending on the machine configuration)
kg 5300 - 6300
Min. fork length mm 1400
Center of gravity of the load mm —
Max. width of forks
Max. height of forks
mm
mm
210
90
Openings for inserting
the fork arms
S S