Traub TNL20, Operating Instructions Manual

Page: 8 / 74

8
Transport and installation
TNL20
DTE022EN - 14.03.2022
Information on transport, installation, commissioning
Use only suitable hydraulic jacks or forklift to lift the machine.
When transporting with transport or armored rollers, ensure that
the rollers used have the appropriate load-bearing capacity.
If the work area door is closed after disconnecting the ma-
chine from the power supply, it is locked in this position
(locked without power).
An emergency release is available.
Transport locks can be identified by their red color.
All transport devices and transport locks (painted red) that
are described in this documentation are part of the machine
equipment and remain on the machine or with the customer.
They must not be sent back to TRAUB.
Remove all transport locks prior to commissioning.
Store the removed transport locks in a safe place, so they are avail-
able for another transport in the future.
Failure to follow proper procedures for transport, installation and, start-up is
prone to cause accidents and may induce damages to or malfunctions of the
machine for which
INDEX TRAUB
rejects any liability or warranty.
Prior to delivery of the machine, the procedures for unloading, transporting to
the installation site, installation, and start-up must be carefully planned while
absolutely observing the cautions below in this document.
Associated transport instructions and/or manufacturer documentation exist for
separate units such as chip conveyor, bar feeder, bar loading magazine, and
similar devices that must be observed as well.
Safety