Transtech MSE 100.1-EU L, Instruction Manual, Page: 14 / 178

14 Safety instructions
5.6 Signage
Depending upon the equipment, symbols and information signs may be located in the
work space of the machine. They refer to the direct surroundings of the location where
they are attached.
WARNING
Risk of injury due to missing or illegible signage.
Over time, stickers and symbols may become soiled or become illegible by
other means. Missing or damaged signs can lead to sources of danger not
being recognisable.
•
Always keep all safety, warning and operation information located on
the machine in a legible condition.
•
Replace damaged signs or labels immediately.
WARNING
Risk of hand injuries.
Depending upon the machine equipment, various components will be
moving at high speeds in some cases. There is a risk of injury when
reaching in to the work space of a running machine.
•
Particular attention and care must be exercised when working in the
work space of the machine. This particularly applies for set-up mode or
during maintenance work.
•
Never reach into the work space of the running machine with hands or
a tool.
WARNING
Risk of injuries due to hot surfaces.
Devices for the pretreatment of the surfaces or drying devices for ink appli-
cation work at high temperatures. There is a risk of burning due to hot sur-
faces, hot air flow in the air outlet area of hot air blowers or heated
workpieces.
•
Do not touch hot surfaces.
•
Do not reach into the hot air flow of dryers.
•
Wait until all parts have cooled down before reaching into the work
space.
•
Allow heated workpieces to cool down.
WARNING
Risk of falling due to objects on the floor.
Objects lying on the floor, cables and tools or severe soiling may lead to
tripping, slipping or falling.
•
The work area must be kept clean and path blockages must be pre-
vented.