Transtech MSE 100.1-EU L, Instruction Manual, Page: 138 / 178

138 Settings
26.9 Foot switch
This menu only appears when the light barrier function is activated.
See Chapter 27.11 "Safety guard" on page 148 .
One of the displayed functions can be activated for the foot switch.
If no function is activated, the foot switch will do nothing when pressed.
B
Pressing the foot switch in AUTOMATIC operation mode activates a print cycle.
C
If the foot switch is pressed once in AUTOMATIC operation mode, print cycles will be
carried out continuously. To end the print cycles the foot switch must be pressed once
again.
D
The foot switch has the same function as the Palm switch input to the automation
interface.
See also Chapter
31.5 "Control procedure information" on page 164 .
B
C
D