INSTALLATION
DOLXP1KB -- Surface Mount Version
Prevent Accidental Short Circuit:
In the previous experience, most of the damages caused in the installation are accidental touching of the
PRECAUTIONS
components on circuit board with the wires carrying power. Please be patient to study the manual to become
familiar with the specifications of the system before starting the installations.
i) Do not apply power to the system while it is in installation.
ii) Check carefully all the wirings are correct before applying power to the system for testing.
PACKAGE CONTENTS
•
One unit Keypad
•
One pack of Mounting Screws
•
Two EM cards or keyfobs
•
One Centre Pin Torx Screw Wrench
•
One Wire Harness ( Six wires)
•
One Programming & Installation Manual
Plastic inner box
Steel Box
Faceplate
6
Prevent Interference:
The EM Card reader is working at the frequency of 125 KHz. Installation precaustions are necessary.
i) Make sure the location for the installation has no strong low frequency electro-magnetic wave signals.
Especially in the range of 100-200 KHz.
ii) If there is more than one keypads with the same operating frequency installed closely in the same location,
make sure that they are at least 60cm (2 ft) apart from each other to prevent interference.
