FEATURE PROGRAMMING -- KEY IN AND STORE THE DESIRED VALUES
The feature values can be set and stored into the system one by one with the desired
Programming Locations
.
Programming can be made continuously and it is not necessary to be in sequence order. Just go to the desired
programming location and key in the value for the desired feature.
IMPORTANT NOTE --- Programming Criteria for Codes:
a) The User PINs and Codes:
All the User PINs, Master Code, Duress Codes, Super User PIN Common User Codes and the Visitor User Codes
are Prime Codes in the system. They
can NOT be duplicated for Secondary code to work with the EM card or vice versa.
MUST be unique
and can not be repeated in the programming. A prime code also
c)Warning for A Repeated Use of Prime Code or Card:
One long beep is given if a User Code/PIN is keyed in or a Card is read. It means that a Prime Code or a Prime Card
is repeated. The Code/PIN or Card was already in one of the PIN or Card Locations or IDs. The programming is invalid.
Change a new Code/PIN or Card and program it again.
g) Make A List Recording of The User Names VS User Codes:
Suggest the owner to make a list recording of the User Names corresponding to the Codes/PINs/Cards that are going
to store in the Locations and the IDs before the programming. It will be a useful tool for the owner to easily
program them smoothly and also to trace them from this multi-users system in the future.
13
b) The Prime Cards:
All the EM Cards used in this system are Prime Cards. The cards used for the Outputs 1, 2 and 3
MUST be unique
and can not be repeated use for different Outputs in the programming. The Card
always has the priority to be read when working in “EM Card + Secondary PIN” or "EM Card +
Common User PIN”.
d)Secondary User PINs:
The Secondary User PINs are prepared to enhance security. It is put after a Card in “
EM Card +
Secondary User PIN
” programming. They can be a repeated code within the Secondary PINs but it
is
NOT
allowed a duplicate of the Prime Codes. The system will reject a duplicated Prime Code for
Secondary User PIN or vice versa.
e)Getting Advantages from The Secondary User PINs:
The repeated Secondary PINs can be used as a Group Common User Code or called Department
User Code for a group of EM Cards, which simplifies the programming of using large number of
different User PINs. EM Card with Department Code prevents a lost card used by people of other
department. Also, it will be easier to trace out the department of the lost card belongs to. Of cause, the
owner can use a proprietary Secondary User PIN for each EM Card in the “
EM Card + Secondary
User PIN
” programming to further increase the security if it is the main concern.
f) Security Level Comparison of The Secondary User PIN/Code following Card Reading:
i ) E M C a r d + C o m m o n U s e r C o d e - - - A l l E M C a r d s u s e
t h e s a m e U s e r C o d e . S e c u r i t y l e v e l i s b e t t e r t h a n j u s t C a r d
only. A lost Card picked up by any people can be used if he knows the Common User Code.
i i ) E M C a r d + D e p a r t m e n t U s e r C o d e - - - T h e E M C a r d s a r e
d i v i d e d i n t o g r o u p s w i t h a D e p a r t m e n t U s e r C o d e . A l o s t
Card can be used only by the people in the same group who know the Department Code.
i i i ) E M C a r d + S e c o n d a r y U s e r P I N - - - E a c h E M C a r d h a s
i t s o w n p r o p r i e t a r y U s e r P I N . A l o s t C a r d c a n n o t b e u s e d
by other people.
