5.4
USER (“A”) MENU
5.4.1 ENTERING THE USER MENU
1. Press the SETUP/CAL key at any time. The scale prompts for a password (“000000”).
2. Key-in the password (336699) and press ENT. The scale displays “CAL-L”.
3. Press the UNIT key until the scale displays “- A -“.
4. Press the TARE key to enter the User (“A”) Menu. The scale shows “A 1”.
5.4.2 NAVIGATING IN THE USER MENU
Use the directional keys shown in Figure 5-3 to move around in the User Menu Chart shown
in Figure 5-4 on the following page. Detailed descriptions of the User Menu can be found in
Table 5-2 and Table 5-2a.
1. To move to a new “A” heading, use the PRINT (left) or UNIT (right) key to move right or
left in the User Menu Chart.
2.
To move to the selection level, press the TARE (down) key once. The current saved
selection is shown.
3.
To view the available selections for the current “A” heading, use the PRINT (left) or
UNIT (right) key to move through the selection field.
4.
To save a new selection, press the SAMPLE (Set) key .To exit without saving, press
the ZERO (up) key to return to the current “A” heading.
5.
Repeat Steps 2 through 5 until the User Menu is programmed.
USER MENU MODE KEY FUNCTIONS
TARE
SAMPLE
UNIT
SET
ZERO
Figure 5-3: User Menu Key Assignments
20
