![Transcell Technology TC-2005 Series Setup & Operation Manual Download Page 24](http://html1.mh-extra.com/html/transcell-technology/tc-2005-series/tc-2005-series_setup-and-operation-manual_1150705024.webp)
3. Use the left or right directional keys (shown in Figure 5-1 above) to move
the decimal point position to the correct position. Pressing the PRINT key or
the UNIT key will change the position of the decimal point.
4. After setting the correct decimal point position, press the SAMPLE key to
save it.
5. The display will momentarily show “
CU
” and then a value with one flashing
digit. This value will be the current multiplier value with the decimal point
position programmed above.
6. Use the four directional keys (shown in Figure 5-1 above) to adjust the
displayed value to the actual custom unit multiplier value. Increase the
flashing digit by pressing the ZERO key. Decrease the flashing digit by
pressing the TARE key. Pressing the PRINT key or the UNIT key will
change the position of the flashing digit.
7. After setting the exact value, press the SAMPLE key to save the custom
unit multiplier value. The display will show "
Set-CU
" momentarily, then
revert back up to A6.
5.5.2 ID Number Entry (A7)
1. While in the User Menu mode, scroll to "
A 7
", then scroll down once using
the TARE key to enter the ID Number menu.
2. The display will momentarily show "
ID NO
", followed by a value with one
flashing digit. This value will be the current ID number value.
3. Use the four directional keys (shown in Figure 5-1 above) to adjust the
displayed value to the actual ID Number value. Increase the flashing digit by
pressing the ZERO key. Decrease the flashing digit by pressing the TARE
key. Pressing the PRINT key or the UNIT key will change the position of the
flashing digit.
4. After setting the exact value, press the SAMPLE key to save the ID Number
value. The display will show "
SET
" momentarily, then revert back up to A7.
5.5.3 Set Time (A8)
Your scale will keep track of the current time for you, which can then be printed
on the print ticket. Use this procedure to set the current time, which must be set
in military (24-hr) format. For example, for 9:00 AM, you would enter 9.00.00. For
5:00 PM, you would enter 17.00.00. The extra zeroes are for seconds.
1. While in the User Menu mode, scroll to "
A 8
", then scroll down once using
the TARE key to enter the time entry menu.
2. The display will momentarily show "
SET T
", followed by a value with one
flashing digit. This value will be the current time in military (24-hr) format.
3. Use the four directional keys (shown in Figure 5-1 above) to adjust the
displayed value to the actual time value. Increase the flashing digit by
pressing the ZERO key. Decrease the flashing digit by pressing the TARE
key. Pressing the PRINT key or the UNIT key will change the position of the
flashing digit.
4.
After setting the exact value, press the SAMPLE key to save the time value.
The display will show "
SET
" momentarily, then revert back up to A8.
Page 24