5.3
REMOTE (“R”) MENU
5.3.1 ENTERING THE REMOTE MENU
1. Press the SETUP/CAL key at any time. The scale prompts for a password (“000000”).
2. Key-in the password (336699) and press ENT. The scale displays “CAL-L”.
3. Press the UNIT key until the scale displays “- R --“.
4. Press the TARE key to enter the User (“R”) Menu. The scale shows “R 1”.
5.3.2 NAVIGATING IN THE REMOTE MENU
Use the directional keys shown in Figure 5-1 to move around in the Remote Menu Chart
shown in Figure 5-2 on the following page. Detailed descriptions of the Remote Menu can be
found in Table 5-1.
1.
To move to a new “R” heading, use the PRINT (left) or UNIT (right) key to move right
or left in the Remote Menu Chart.
2.
To move to the selection level, press the TARE (down) key once. The current saved
selection is shown.
3.
To view the available selections for the current “R” heading, use the PRINT (left) or
UNIT (right) key to move through the selection field.
4.
To save a new selection, press the SAMPLE (Set) key .To exit without saving, press
the ZERO (up) key to return to the current “R” heading.
5.
Repeat Steps 2 through 5 until the Remote Menu is programmed.
REMOTE MENU MODE KEY FUNCTIONS
TARE
SAMPLE
UNIT
SET
ZERO
Figure 5-1: Remote Menu Key Assignments
18
