Page C-2
C.1.2
CALIBRATION ERRORS
Message
Explanation
Scale Not Ready
Scale is unstable or there is an internal error in the
scale.
ERROR: Value Exceeds Scale
Capacity
Indicates that the test weight value you have chosen
exceeds the scale’s capacity.
ERROR: Value <1% of Scale
Capacity
Indicates that the test weight value you have chosen is
less than 1% of the scale’s capacity.
ERROR: Internal Resolution
Too Low
Occurs when you do not place the test weight on the
scale during calibration. Can also indicate that there is
an internal error in the scale.
Wrong Test Weight
During a multi-point calibration, the entered test weight
value did not match the test weight applied to the
scale. This error can also occur if the following
relationship is not true:
Cal Point 1 < Cal Point 2 < Cal Point 3
Invalid Data
Occurs when you enter a value of zero for the KcalZR
or KcalSP functions. See Chapter 5 for more
information.
