Page 2-2
Step 4. If applicable, install the second serial device to the COM2 serial port. Currently, the second
serial device can be a bar code scanner or a computer.
Note:
Some earlier models do not have
a second serial port.
1. Connect the device to the COM2 port using the optional serial cable. See Appendix B for
cabling requirements and pinouts.
2. Configure the communication parameters and select the device type as detailed in Section
5.3.5.
Step 5. If applicable, install the remote scale.
1. Connect the remote scale to the DCSG’s remote scale port using the provided remote scale
cable. Consult Appendix D for proper cabling.
2. Configure the remote scale’s parameters in the Service Menu as detailed in Chapter 5.
3. Calibrate the remote scale as detailed in Chapter 6.
4. Enable the remote scale in the Supervisor Menu as detailed in Chapter 5.
Step 6. Turn the scale’s AC power on to begin use.
