Page B-2
B.1.2
DEFAULT PRINT FORMAT
Figure B-4 shows the fixed format of the print format. The fields can be enabled or
disabled as described in Section 5.2.2.4.
FIGURE B-4: Default Print Format for Thermal Printer
B.2
COM2 SERIAL PORT
B.2.1
CONNECTING THE SCANNER, REMOTE DISPLAY OR COMPUTER
The COM2 serial port is a full duplex RS-232 port designed for connection to a computer,
scanner or remote display. Figure B-5 shows the serial port pinout. Figure B-6 shows a
suggested cable diagram for a PC-type computer. Figure B-7 shows a suggested cable
diagram for a scanner. The cable shown in Figure B-6 is a standard Transcell cable –
Model NMC-1.
Note
: Earlier DCSG models may not be equipped with a COM2 serial port.
1. Plug the scanner, remote display or computer communication cable (not included)
directly into the DSUB9 serial port connector.
Pin No.
Pin Name
2
Receive Data
3
Transmit Data
Signal Level
RS-232
RS-232
5
Signal Ground
RS-232
2
3
5
Front View
Figure B-5: Pin assignments for the COM2 serial port connector
