Page 5-6
5.2.4.1
INITIAL ITEM ID’s (Initial)
This function is used to erase all stored item ID’s.
Use with extreme caution – this process cannot be undone!
1. Enter the Print Format sub-menu as described above.
2. Press the Initial soft key. The scale asks you to confirm this action.
3. Press the Yes soft key to proceed or press the No soft key to abort the
operation.
5.2.4.2
PRINT ITEM ID’s (Print)
This function is used to print all stored item ID’s using the device connected to
COM1.
1. Enter the Print Format sub-menu as described above.
2. Press the Print soft key. The scale sends the list to the device on COM1.
5.2.4.3
LIST ITEM ID’s (List)
This function is used to list on the screen all stored item ID’s. Once an ID is
selected, it can be recalled, edited or deleted.
Refer to Section 4.2 for usage of this screen.
5.2.5 EXITING THE SUPERVISOR MENU
1. Press the CLR key twice to return to Normal Operating Mode.
