Installation - Controls
UNT-SVX041D-EN
57
Component Specifications
Table 25. Wireless sensor specifications
Component
Type
Sensor operating temperature
32°F to 122°F
Receiver operating temperature
-40°F to 158°F
Storage temperature
-40°F to 185°F
Storage and operating humidity range
5% to 95%, non-condensing
Accuracy
0.5°F over a range of 55ºF to 85°F
Resolution
0.125°F over a range of 60°F to 80°F 0.25°F when outside this range
Setpoint functional range (WDS only)
50°F to 89.6°F
Receiver voltage
24 V nominal ac/dc ±10%
Receiver power consumption
<1 VA
Housing
Polycarbonate/ABS blend, UV protected, UL 94-5VA flammability rating, suitable for application in a
plenum
Mounting
3.24 in (8.26 cm) for 2 mounting screws (supplied)
Sensor battery
(2) AA, 1.5 V, 2800 mAh, lithium, 5-year life, UL listed
Range
(a)
(a) Range values are estimated transmission distances for satisfactory operation. Actual distance is job specific and must be determined during site evaluation.
Open range: 2,500 ft (762 m) (packet error rate = 2 percent)
Usable: 200 ft (61 m)
Typical: 75 ft (23 m)
Output power
100 mW
Radio frequency
2.4 GHz (IEEE Std 802.15.4-2003 compliant) (2405 to 2480 MHz, 5 MHz spacing)
Radio channels
16
Address range
000 to 999
Minimum time between transmissions
30 seconds
Maximum time between transmissions
15 minutes
