Trane CSRA025FAF0, Installation Operation & Maintenance

Page: 15 / 83

CSRA-SVX02A-EN 15
General
Information
Figure 2 — Unit Component “Layout” and “Ship with” Locations (60
Ton Unit Illustrated)
Unit Inspection
As soon as the unit arrives at the job site
[ ] Verify that the nameplate data matches the data on the sales order and bill
of lading (including electrical data).
[ ] Verify that the power supply complies with the unit nameplate
specifications.
[ ] Visually inspect the exterior of the unit, including the roof, for signs of
shipping damage.
[ ] Check for material shortages. Refer to Figure 2, “Component Layout and
Ship with Location”.
If the job site inspection of the unit reveals damage or material shortages, file
a claim with the carrier immediately. Specify the type and extent of the
damage on the “bill of lading” before signing.
[ ] Visually inspect the internal components for shipping damage as soon as
possible after delivery and before it is stored. Do not walk on the sheet metal
base pans.
Typical Lifting Holes (4)
Control Panel
Condenser Fans
Pump Circuit Breaker/Control
Panel Enclosure
Tow Bar
Water Inlet
Water Outlet
Forklift
Tube
Slots