10
Southwestern Industries, Inc.
TRAK
KMX Knee Mill, Bed Mill & ProtoTRAK
KMX CNC Retrofit Safety, Programming, Operating & Care Manual
3.2
Display Pendant
3.2.1
Front
Keyboard Hard Keys
GO:
initiates motion in Run
STOP:
halts motion during Run
LOOK:
part graphics in Program and Program I/O modes
INC/ABS:
switches all or one axis between incremental and absolute
INC SET:
loads incremental dimensions and general data
ABS SET:
loads absolute dimensions and general data
X, Y, Z:
selects axis for subsequent commands
0-9, +/-, . :
inputs numeric data with floating point format. Data is
automat /- key is pressed. All input data is automatically rounded
to the system's resolution.
MODE:
to change from one mode of operation to another
RESTORE
: clears an entry
IN/MM
: causes inch to metric or metric to inch conversion of displayed
data
ACC
: turns accessory (coolant, spray, etc.) on and off
F/C
: selects between fine and coarse resolution on Electronic Handwheels
