characters.
No other combinations are accepted.
a) Geo (PARK) fencing option
Send: ‘
geo enable
’ or '
GEO ENABLE
’ to enable GEO fencing.
‘
geo disable
' or '
GEO DISABLE
' to disable GEO fencing.
b) Alarm option
Send: '
alarm enable
' or '
ALARM ENABLE
' to enable alarm.
‘
alarm disable
' or '
ALARM DISABLE
' to disable alarm.
c) Open car door option
Send: '
open doors
' or '
OPEN DOORS
' to open car doors.
d) Request last know or current GPS location
Send: '
Location
' or '
LOCATION
' to request current or last know location. (NO CONFIRM
MESSAGE). The AVL will send location as SMS or GPRS message.
After the message is sent to the tracking unit an ‘End User’ confirm message will be
returned (except for ‘location’ message).
‘
geo enable CONFIRM
’ or ‘
GEO ENABLED CONFIRM
’ when GEO fencing is enabled.
(PARK FUNCTION)
‘
geo disable CONFIRM
’ or ‘
GEO DISBLE CONFIRM
’ when GEO fencing is disabled.
(PARK FUNCTION)
‘
alarm enabled CONFIRM
’ or ‘
ALARM ENABLED CONFIRM
’ when alarm is enabled.
‘
alarm disabled CONFIRM
’ or ‘
ALARM DISABLED CONFIRM
’ when alarm is disabled.
‘
open doors CONFIRM
’ or ‘
OPEN DOORS CONFIRM
’ when car doors are opened.
The ‘End User’ will also receive a confirm message if the option is enabled or disabled by
the Base 1 or Base 3 phone number.
Base 3:
Master Backup Base phone number. Accepts all command messages and update
messages. Location request or configuration update messages are sent back to Master
Backup Base phone number only.
In combined working mode (SMS and GPRS) the location request or configuration update
message is also sent back to Master Backup Base phone number.
When enabled Master Backup phone number can also receive input alarm activation
messages (Panic, PARK Fencing, Alarm or Power loss detected) as ‘location format’
message.
Confirm message format:
05*827,CONFIRM,xx,x1,x2, ,0
Where xx, x1, x2 etc is the command code setting that has been updated.
The xx can have the following settings:
12,13,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,4ab,5,51,52,53
,55,56,57,58,59,6,61,62,63,64,65,66,67,68,69,71,72,73,74,75,76,79,90,91,A0,A1,A2,A3,A
5
- 53 -
Summary of Contents for WorldTracker AVL
