TrackingTheWorld WorldTracker AVL, User Manual

Page: 32 / 94

6,xx, (xx Time between GPS Readings in minutes) – MUST be 2 DIGITS
Example: 05*827,6,05,0 - Time between GPS readings is 5 minutes.
61,x, (GEO Fenced Area setup settings:)
x=0 -> GEO fenced area setup disabled
x=1 -> When activated send SMS message Lo Status ONLY (Vehicle
must remain outside GEO fenced area)
x=2 -> When activated send SMS message Lo Status and enable alarm
output to disable engine (Vehicle must remain outside GEO fenced area)
x=3 -> When activated send SMS message Lo Status ONLY (Vehicle
must remain inside GEO fenced area)
x=4 -> When activated send SMS message Lo Status and enable alarm
output to disable engine (Vehicle must remain inside GEO fenced area)
Example: 05*827,61,2,0 - When activated send SMS message Lo Status and enable alarm
output to disable engine (Vehicle must remain outside GEO fenced area)
62,aaaaaab,ccccccd,eeeeeef,ggggggh, (GEO fenced area setup)
aaaaaa = First Latitude (UP) value in hex – MUST be 4 DIGITS!
b = N or S (Latitude hemisphere)
cccccc = Second Latitude (DOWN) value in hex – MUST be 4 DIGITS!
d = N or S (Latitude hemisphere)
eeeeee = First Longitude (LEFT) value in hex – MUST be 4 DIGITS!
f = E or W (Longitude hemisphere)
gggggg = Second Longitude (RIGHT) value in hex – MUST be 4 DIGITS!
h = E or W (Longitude hemisphere)
Example:
Latitude (UP) value = 3601.8723 S
Latitude (DOWN) value = 3602.4516 S
Longitude (LEFT) value = 17433.5276 E
Longitude (RIGHT) value = 17444.6207 E
Values are in : ddmm.mmmm or dddmm.mmmm (as received in any message from the AVL).
To send the values they must be converted to HEX code first and the last two digits are not used.
The above sample will convert to message command:
62,240157S,24022DS,AE2134E,AE2C3EE,
63,xx,AUX2 input delay time in HEX from 00 to FF ( xx=00 AUX2 input disabled ) – MUST be 2 DIGITS!
Example: 05*827,63,1B,0 - Send message when activated for more then 27 seconds.
64,xx,yy,
(xx= speed limit from 00 to FF (255 hex) max – MUST be 2 DIGITS!
– VALUE in Knots !!!!)
(yy=00 Speed check disabled)
(yy=01 to FF (255 hex) seconds above speed limit before activation– MUST be 2 DIGITS!)
Example: 05*827,64,54,05,0 - Send message when speed more than 100 km/h for 5 seconds
( 1 knot is 1.852 km/h)
65,x, ( x=0 Disable location Message every 1-7 Days)
( x=1 –7 Enable – Location message every 1-7 days)
Example: 05*827,65,3,0 - Send location message every 3 days
66,xxxx, -> Real time tracking interval – SMS or GPRS -> configured in Hex! for SLEEP mode
MUST BE 4 DIGITS!
(xxxx = 0000 -> NO Real time tracking! - Default after operating system update or
Reset) in SLEEP MODE
(xxxx = 0001 -> Send 1 message every 12 seconds) – MINIMUM SENDING SPEED IS 12 seconds
(xxxx = 0002 -> Send 1 message every 12 seconds)
(xxxx= 0003 -> Send 1 message every 12 seconds)
(xxxx = 0004 -> Send 1 message every 16 seconds)
etc. Max xxxx = 3FFF (hex)
(xxxx = 3FFF (hex) -> Send 1 message every 65532 seconds max)
Example: 05*827,66,0015,0 - Send 1 message every 84 seconds
- 31 -
6,xx, (xx Time between GPS Readings in minutes) – MUST be 2 DIGITS
Example: 05*827,6,05,0 - Time between GPS readings is 5 minutes.