TrackingTheWorld WorldTracker AVL, User Manual

Page: 36 / 94

A6,<Dial Out phone number when Panic Button is activated>
When configured the AVL will dial the configured phone number if Panic button is activated. Once the call
is connected the user can activate the Panic button again (for 1 second or more) to hang up the call.
After the call is disconnected or the call cannot connect the panic activation SMS or GPRS message will be
send. Max phone number length is 16 digits.
Example: 05*827,A6,096723232,0 (Dial out number is 096723232)
05*827,A6,#,0 (Disable the Dial out phone number)
Unit activation and sleep Mode:
The tracking unit has a build in ‘motion’ sensor that detects any movement and g-force change.
Depending on the activation mode (see command code 30,x, ) the unit will enter ‘sleep mode’ after 10
minutes if no ‘motion’ is detected. In sleep mode the GPS module is powered down, but the unit will still
process any incoming and outgoing SMS messages.
When the unit is in ‘sleep mode’ it will take several seconds to ‘wake up’ to normal running mode after motion
is detected. Motion is normally detected when the vehicle starts driving.
A valid GPS location will take 10-20 seconds after the unit is operating in normal running mode (GPS aerial
has clear sky view).
We recommend that in case the GPS output is also used for in car navigation to enable the unit using ‘AUX1’
input and motion detected. The ‘AUX1’ input can be connected to the ignition key to enable the unit as soon
as the vehicle is started. This will minimize the delay to startup the GPS module.
Software and hardware lock-ups:
The unit has an internal hardware timer that detects ‘lock-up’.
If the unit is ‘locked’ it automatic ‘reset’ after 10 minutes.
The GSM modem will reset once every 24 hours.
In GPRS mode the modem will reset if communication fails for more than 3 times.
There are several error counters that can be used for diagnostic when data is not received or data cannot be
sent.
After OS version update all counter are RESET to zero (0000). All counters will count in HEX format from
‘0000’ to max ‘FFFF’.
The user can request the errors counters value by SMS or GPRS message, or can display the value after
quitting the diagnostic menu.
************************************************************************************************************************
IMEI:
AT+GSN
351525018440223
OK
GPS Info:
þ$GPGGA,003218.548,,,,,0,00,,,M,0.0,M,,0000*57
$GPGSA,A,1,,,,,,,,,,,,,,,*1E
$GPGSV,3,1,11,16,70,103,,23,57,218,,25,55,135,,20,46,308,*7A
$GPGSV,3,2,11,01,35,063,,13,23,227,,31,22,114,,03,19,031,*71
$GPGSV,3,3,11,07,07,136,,06,01,145,,19,00,011,*42
$G
Error Counter 0: 0000
Error Counter 1: 0000
Error Counter 2: 0000
Error Counter 3: 0000
Error Counter 4: 0000
Error Counter 5: 0000
connect
*************************************************************************************************************************
The counter value will NOT be RESET after configuration menu updates.
- 35 -