TrackingTheWorld WorldTracker AVL, User Manual

Page: 53 / 94

-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
- F1
F1
F2
F2
F2
F3
F3
F3
F4
F4
F5
F5
F5
F6
F6
F6
F7
F7
F7
F8
28.66
29.00
29.33
29.66
30.00
30.33
30.66
31.00
31.33
31.66
32.00
32.33
32.66
33.00
33.33
33.66
34.00
34.33
34.66
35.00
Status ADC converter (AUX3 input):
0
= NOT activated
1 = ACTIVATED
ADC voltage level(value in HEX):
From: $00 to Hex: $FF
2. Confirm Message:
A confirm message will be sent whenever the tracking unit receives a command to update
a setting.
The AVL has 3 Base phone numbers that can be configured to allow configuration setup.
Information that is received from the 3 Base phone numbers is processed as
follows:
Base 1: Master Base phone number. Accepts all command messages and update
messages. Location request or configuration update messages are sent back to Master
Base phone number if unit is configured for SMS only.
In combined working mode
(SMS and GPRS) the location request or configuration update
message is sent back using GPRS.
Base 2: This phone number can be used by the ‘End User’ to receive a ‘Pager’ message.
The following message(s) can be displayed:
GEO Fencing Activated (PLEASE NOTE THIS IS THE PARK FUNCION)
Alarm Activated
PANIC Button Activated
POWER Loss Detected
The message is sent directly from the tracking unit to the Base 2 phone number.
The ‘End user’ can send the following commands to the tracking unit. No other
commands are accepted. The commands can be sent in all small or all capital
- 52 -