TrackingTheWorld WorldTracker AVL, User Manual

Page: 45 / 94

Geo Fencing
There are 2 options for GEO fencing.
For less confusion the ‘GEO’ fencing activated by GEO fencing input (or by SMS/GPS command
message - 21) will be called ‘PARK’ function.
1. When you park your vehicle and the PARK fencing input is low then your vehicle will be automatically
PARK fenced to that location in about 30 seconds (default) and the PARK fencing LED starts flashing!
If your vehicle is moved from that location (with PARK fencing input low) then the
tracking unit will automatically send an SMS message with alarm status code = 044 (if no other alarm is
activated at that time). This combination code can only be sent if the vehicle is moved from the PARKED
fenced area.
2. When you define a GEO fenced area and the vehicle leaves the GEO fenced area then an SMS message
is sent with the alarm status code = 0@0 (if no other alarm is activated at that time).
Geo Fenced area setup:
You can configure a Geo Fenced area. You can configure the settings so that a vehicle has to stay within
that Geo Fenced area or must stay out of the Geo Fenced area.
When activated an SMS message can be sent back to base, as well the alarm output can be activated to
disable the vehicle. . The alarm output will stay activated as long as the vehicle is inside or outside the
configured area. The location accuracy must be less then 20 meters before the tracking unit will compare the
current GPS location to the configured GEO fenced values.
Inclusive Geo Fenced Area (Vehicle must remain inside the Geo Fenced
Area)
Exclusive Geo Fenced Area (Vehicle must remain outside the Geo Fenced
Area)
- 44 -