TrackingTheWorld WorldTracker AVL, User Manual

Page: 35 / 94

-> Real time tracking interval -> configured in Hex!
(xxxx = 0000 -> NO Real time tracking! - Default after operating system update or
Reset)
(xxxx = 0001 -> Send 1 message every 12 seconds) – MINIMUM SENDING SPEED IS 12 seconds
(xxxx = 0002 -> Send 1 message every 12 seconds)
(xxxx= 0003 -> Send 1 message every 12 seconds)
(xxxx = 0004 -> Send 1 message every 16 seconds)
etc. Max xxxx = 3FFF (hex)
(xxxx = 3FFF (hex) -> Send 1 message every 65532 seconds max)
Example: 05*827,79,0005,0 - Send 1 message every 20 seconds
9x, Enable or disable communication from tracking unit.
The unit will still accept update messages, but no locations messages or input activations messages are
send.
( x=0 Disable Tracking unit ; x=1 Enable Tracking unit)
Example: 05*827,91,0 - Enable tracking unit.
A0,x -> Enable commands from other Base phone numbers
x=0 -> Disable
x=1 -> Enable
Example: 05*827,A0,1,0 (Enable commands from other Base phone numbers)
A1,xxxxxxxxxx -> Security ID code (Must be 10 Digits)
xxxxxxxxxx -> 10 Digit security code (can be any numbers or letters)
Example: 05*827,A1,Ab1245678a,0 (Change ID code to ‘Ab1245678a’ )
All return messages are send-using Base1, 2 or 3 depending on the command received and your
configuration settings.
The message received does to have to start with ‘05*827’.
Example:
Message sent: justtesting@trackingtheworld.com 05*827,0123456789,11,0
Will be accepted and processed.
WARNING:
Default security code is ‘0123456789’ and the option is automatic disabled after operating system upload.
We strongly recommend for your network to keep secure to change the ‘Security ID code’ first and do not
leave it set to ‘0123456789’.
A2,x -> ( x=0 Stay connected to GPRS in sleep mode )
( x=1 Disconnect from GPRS in sleep mode )
Example: 05*827,A2,1,0 (Disconnect from GPRS in sleep mode)
A3,x -> ( x=0 Do not stop real time tracking when roaming)
( x=1 Stop real time tracking when roaming )
Example: 05*827,A3,1,0 (Stop real time tracking when roaming)
A4 -> RESET pulse counter.
Example: 05*827,A4,0 (RESET pulse counter)
NO CONFIRM MESSAGE WILL BE RETURNED!
A5,<Phone number message to sent to>,<Message to sent>
This command can forward a text message to another phone number.
Example: 05*827,A5,096723232,See you in 10 minutes for meeting!
Will send the text ‘See you in 10 minutes for meeting!’ to phone number ‘096723232’ using SMS.
Command ‘A5’ can be send from SMS base phone number 1or from GPRS.
Confirm message ‘A5’ will be returned using SMS or GPRS when the message is send without any errors.
If the message cannot be send then no confirm message will be send back.
- 34 -