26,xxxxxxxxxxxxxxxx, -> ISP login name (24 locations max)
Example:
05*827,26,guest,0
27,xxxxxxxxxxxxxxxx, -> ISP password name (16 locations max)
Example:
05*827,27,guest,0
28,x, ( x = 0 Disable Send location message for missed phone call )
( x = 1 Send location message for missed phone call)
Example:
05*827,28,1,0 (Enable send location message for missed phone call)
You must configure the ‘Auto Pickup after (0-9) rings’ for a value 3 or more. As soon
as you hear the first ring tone you must hang up. If not no message will be returned.
(May not work with all GSM providers or SIM cards)
29,xxxxxxxx, -> IP Destination Address or domain name in ASCII code MAX 32 Char
Example:
05*827,29,www.newtrack.com.tw,0
30,x,
(x=0 -> default - AVL activates using motion switch ONLY!)
(x=1 -> AVL activates only when Auxiliary Input 1 is High)
(x=2 -> AVL activates when motion or Auxiliary Input 1 is High)
(x=3 -> AVL enabled by Auxiliary Input 1 only - Auto send status when
input level changes.
(x=4 -> AVL enabled by motion and Auxiliary Input 1 - Auto send
status when input level changes.
Example:
05*827,30,2,0
- AVL activates when motion or Auxiliary Input 1 is High
31,xxx, (xxx Delay Time Alarm Input) – MUST BE 3 DIGITS! From 001 to 255 max.
Example:
05*827,31,035,0
- Alarm delay time set to 35 seconds.
32,xxx, (xxx Delay Time Power Failure 3 digits) – MUST BE 3 DIGITS! From 000 to 255 max.
Example:
05*827,32,005,0
- Power failure delay time set to 5 seconds. (0 = disable)
33,xxx, (xxx Days battery needs recharge) – MUST BE 3 DIGITS! From 000 to 255 max
DOES NOT REQUIRE ANY UPDATE !
34,xxx, (xxx Delay time PARK fencing - seconds) – MUST BE 3 DIGITS! From 001 to 255 max.
Example:
05*827,34,010,0
- PARK fencing delay time set to 10 seconds.
35,xxx, (xxx PARK fencing sensitivity in Knots/Hour - Default = 3 Knots /H (5.5 Km/hour)
– MUST BE 3 DIGITS! From 001 to 240 max. Value must be Knots ! (1.85 km = 1 Knot)
Example:
05*827,35,004,0
- PARK fencing sensitivity set to 4 Knots.
36,xxx, (xxx Delay time between alarm messages send when alarm input is activated)
– MUST BE 3 DIGITS! From 000 to 255 max.
Example:
05*827,36,012,0
- Delay time between alarm messages is 12 seconds.
37,x,
( x= 0 -> SOS output for SOS signal only !) – Default !
SOS-- activation (intermittent contact closure)
This activation condition occurs whenever the Device speed > 20 KMH, and with the Alarm Output
=ON (whether triggered by PARK Fence, manual SMS or other methods).
( x= 1 -> enable Camera GPS locations function )
( x= 2 -> enable Camera GPS locations as location reference)
If current GPS location = Camera GPS location then
send text message : in x=XXXXXX y=XXXXXX
If vehicle leaves the Camera GPS location then
send text message : out x=XXXXXX y=XXXXXX
Circle function. Default = 200-300 meters
( x= 3 -> enable No GSM signal function )
SOS output will activate when the is no GSM signal for
longer then 1+ minute. Only detect and read GSM signal
in normal running Mode.
( x= 4 -> Over speed function enabled )
- 29 -
Summary of Contents for WorldTracker AVL
