MR5-WR542G
54Mbps Wireless Router User Guide
36
4.6 DHCP
Figure 4-21 The DHCP menu
There are three submenus under the DHCP menu (shown in figureFigure 4-21):
DHCP Settings
,
DHCP
Clients List
and
Address Reservation.
Click any of them, and you will be able to configure the
corresponding function. The detailed explanations for each submenu are provided below.
4.6.1 DHCP Settings
The router is set up by default as a DHCP (Dynamic Host Configuration Protocol) server, which provides
the TCP/IP configuration for all the PC(s) that are connected to the router on the LAN. The DHCP Server
can be configured on the page (shown in Figure 4-22):
Figure 4-22 DHCP Settings
¾
DHCP Server - Enable
or
Disable
the DHCP server. If you disable the Server, you must have
another DHCP server within your network or else you must manually configure the computer.
¾
Start IP Address -
This field specifies the first of the addresses in the IP address pool.
192.168.1.100 is the default start address.
¾
End IP Address -
This field specifies the last of the addresses in the IP address pool.
192.168.1.199 is the default end address.
¾
Address Lease Time -
The
Address Lease Time
is the amount of time in which a network user
will be allowed connection to the router with their current dynamic IP Address. Enter the amount of
time, in minutes. The user will be "leased" this dynamic IP Address. The range of the time is 1 ~
Summary of Contents for MR5-WR542G
Page 1: ...MR5 WR542G 54M Wireless Router Rev 1 0 0 2x to 3x eXtended Range 2 4GHz y 802 11g b...
Page 20: ...MR5 WR542G 54Mbps Wireless Router User Guide 15 Figure 4 1 Router Status...
Page 79: ...MR5 WR542G 54Mbps Wireless Router User Guide 74 Figure 4...
Page 80: ...MR5 WR542G 54Mbps Wireless Router User Guide 75 Appendix C Specifications...
