MR5-WR542G
54Mbps Wireless Router User Guide
34
To add additional entries, repeat steps 1-6.
Note:
When 64-bit, or 128-bit, or 152-bit is selected, WEP Key will be enabled.
To modify or delete an existing entry:
1. Click
the
Modify
in the entry you want to modify. If you want to delete the entry, click the
Delete
.
2. Modify the information.
3. Click
the
Save
button.
Click the
Enable All
button to make all entries enabled
Click the
Disabled All
button to make all entries disabled.
Click the
Delete All
button to delete all entries
Click the
Next
button to go to the next page and click the
Previous
button to return to the previous page.
For example:
If you desire that the wireless station A with MAC address 00-0A-EB-00- 07-BE be able to
access the router. The wireless station B with MAC address 00-0A-EB- 00-07-5F not be able to access the
router, and the wireless station C with MAC address 00-0A-EB-00-07-8A be able to access the router
when its WEP key is 2F34D20BE2E 54B326C5476586A, while all other wireless stations cannot access
the router, you should configure the
Wireless MAC Address Filtering
list by following these steps:
1. Click
the
Enable
button to enable this function.
2. Select the radio button:
Deny the stations not specified by any enabled entries in the list to
access
for
Filtering Rules.
3. Delete all or disable all entries if there are any entries already.
4. Click the
Add New...
button and enter the MAC address 00-0A-EB-00-07-BE in the
MAC Address
field, enter wireless station A in the
Description
field, select
Allow
in the
Privilege
pull-down list
and select
Enabled
in the
Status
pull-down list. Click the
Save
and the
Return
button.
5. Click the
Add New...
button and enter the MAC address 00-0A-EB-00-07-5F in the
MAC Address
field, enter wireless station B in the
Description
field, select
Deny
in the
Privilege
pull-down list and
select
Enabled
in the
Status
pull-down list. Click the
Save
and the
Return
button.
6. Click the
Add New...
button and enter the MAC address 00-0A-EB-00-07-8A in the
MAC Address
field, enter wireless station C in the
Description
field, select
128-bit
in the
Privilege
pull-down list,
enter 2F34D20BE2E54B326C5476586A in the
WEP Key
field and select
Enabled
in the
Status
pull-down list. Click the
Save
and the
Return
button.
The filtering rules that configured should be similar to the following list:
Summary of Contents for MR5-WR542G
Page 1: ...MR5 WR542G 54M Wireless Router Rev 1 0 0 2x to 3x eXtended Range 2 4GHz y 802 11g b...
Page 20: ...MR5 WR542G 54Mbps Wireless Router User Guide 15 Figure 4 1 Router Status...
Page 79: ...MR5 WR542G 54Mbps Wireless Router User Guide 74 Figure 4...
Page 80: ...MR5 WR542G 54Mbps Wireless Router User Guide 75 Appendix C Specifications...
