128
Chapter 16
VPN Server&Client
To use the VPN feature, you need to set up IPSec VPN Server on your router, and
configure theIPSec connection on remote devices. Please follow the steps below to
set up the IPSec VPN connection.
INTERNET
Home Network
Router (VPN Server)
Remote Devices
Step 1 Set up IPSec VPN Server on Your Router
1. Visit
http://tplinkwifi.net
or
http://192.168.0.1
, and log in with your TP-Link ID or the
password you set for the router.
2. Go to
Advanced
>
VPN
>
IPSec VPN
, and enable
Dead Peer Detection
.
Note:
• Firmware update may be required to support IPSec VPN Server.
• Before you enable
Dead Peer Detection
, we recommend you configure Dynamic DNS Service (recommended) or
assign a static IP address for router’s WAN port and synchronize your
System Time
with internet.
3. Click
Add
.
4. Configure the IPSec VPN server parameters.
