124
Chapter 16
VPN Server&Client
Note:
Before you enable
VPN Server
, we recommend you configure Dynamic DNS Service (recommended) or assign a
static IP address for router’s WAN port and synchronize your
System Time
with internet.
3. In the
Client IP Address
field, enter the range of IP addresses (up to 10) that can be
leased to the devices by the PPTP VPN server.
4. Enter the
Username
and
Password
to authenticate clients to the PPTP VPN server.
5. Click
SAVE
.
6. On the client devices, create a PPTP VPN connection. The official supported platforms
include Windows, Mac OSX, Linux, iOS, and Android.
7. Launch the PPTP VPN program, add a new connection and enter the domain name
of the registered DDNS service or the static IP address that is assigned to the WAN
port, to connect the client device to the PPTP VPN server.
Step 2 Configure PPTP VPN Connection on Your Remote Device
The remote device can use the Windows built-in PPTP software or a third-party PPTP
software to connect to PPTP Server. Here we use the
Windows built-in PPTP software
as an example.
1. Go to
Start
>
Control Panel
>
Network and Internet
>
Network and Sharing Center
.
2. Select
Set up a new connection or network
.
