TP-Link Archer C50, User Manual

Page: 77 / 135

72
Chapter 5 Configure the Router in Access Point Mode
Devices New Router Existing Router
Ethernet4 Ethernet3 Ethernet1 Ethernet2 Internet
Ethernet2 Internet
WAN LAN1 LAN2 LAN3 LAN4
WAN LAN1 LAN2 LAN3 LAN4
1. Find the router’s Internet port, and connect it to the LAN port of your existing router.
Then connect the power adapter and turn on the router.
2. Connect your computer to the router via an Ethernet cable or wirelessly by using the
SSID (network name) and Wireless Password printed on the label at the bottom of the
router. For details, refer to
Connect Your Router .
3. Visit http://tplinkwifi.net , and log in with the password you set for the router.
4. Go to Operation Mode .
5. Select the Access Point mode and click Save .
5. 4. Network
1. Visit http://tplinkwifi.net , and log in with the password you set for the router.
2. Go to Network > LAN .
3. Configure the IP parameters of the LAN and click Save .
• LAN Type - Select Smart IP(DHCP) to get IP address from DHCP server, or select
static IP to configure IP address manually.