60
Chapter 4
Configure the Router in Wireless Router Mode
2. Enter the address or domain of the
NTP Server I
or
NTP Server II
.
3. Click
Get GMT
to get time from the internet if you have connected to the internet.
• To set Daylight Saving Time:
1. Select
Enable DaylightSaving
.
2. Select the start time from the drop-down list in the
Start
field.
3. Select the end time from the drop-down list in the
End
field.
4. Click
Save
.
Note:
This setting will be used for some time-based functions such as firewall. You must specify your time zone once you log
in to the router successfully; otherwise, time-based functions will not take effect.
4. 18. 2. LED Control
The LED Control allows you to turn on or off the LEDs on your device according to a
specific time schedule.
1. Visit
http://tplinkwifi.net
, and log in with the password you set for the router.
2. Go to
System Tools
>
LED Control
.
3. Enable the
Night Mode
.
4. Set the
LED Off Time
and click
Save
.
4. 18. 3. Feedback
This page allows you to send your questions or suggestions to us, so that we can
resolve your issues and keep improving product features to give you a better network
experience. For technical problems, it is recommended to attach the configuration file
or system log of the device to help us investigate your case.
